NO.29 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE


29	Gear position indicator light does not illuminate in M range
DESCRIPTION	• Gear position indicator light in instrument cluster illuminates in M range with ignition switch at ON.
POSSIBLE CAUSE	• M range switch, gear position indicator light or related wiring harness malfunction Note • Before following the troubleshooting steps, make sure that the Automatic Transmission On-Board Diagnostic and Automatic Transmission Basic Inspection are conducted. (See BASIC INSPECTION.)


STEP	INSPECTION		ACTION
1	Are other indicator lights illuminated with the ignition switch at the ON position?	Yes	Go to the next step.
1		No	Inspect the meter fuse.
2	Inspect the voltage at TCM terminal 1E. (See TCM INSPECTION.) Is the voltage normal?	Yes	Inspect the instrument cluster.
2		No	Repair or replace any malfunctioning part.
3	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. • If the malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis. – If the vehicle is repaired, troubleshooting completed. – If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM. (See TCM REMOVAL/INSTALLATION.)