FRONT DOOR UNIT REMOVAL/INSTALLATION
BHE091159970W01
1. Disconnect the negative battery cable.
2. Remove the following parts:
-
(1) Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)
-
(2) Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)
-
(3) Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)
-
(4) Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.)
3. Disconnect the door lock actuator connector.
4. Remove the front door wiring harness from the front door unit.
5. Remove screw A.
6. Remove screws B and the fastener.
7. Remove the front door unit.
8. Remove the following parts:
-
• Front power window motor
-
• Front power window regulator
-
• Front door speaker amplifier
9. Install in the reverse order of removal.