1. Remove the rear seat. (See REAR SEAT REMOVAL/INSTALLATION.)
2. Remove the inner scuff plate. (See INNER SCUFF PLATE REMOVAL/INSTALLATION.)
3. Remove the tire house trim. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
4. Remove the cap using a fastener remover. (Vehicles with curtain air bags)
5. Remove the bolt. (Vehicles with curtain air bags)
6. Remove the fastener.
7. Detach clips A and locator pin B, using a fastener remover, and remove the rear pillar trim.
8. Install in the reverse order of removal.